148 mm, all in
Pack, two drive units, inverters, thermal loop and crash structure live below a flat deck 148 mm above the axle line. Nothing pokes through it.
P/01 · EV skateboard platform
From car to parts.
Everything that makes it a car sits in the 148 mm under the floor. Scroll, and we unbolt the whole thing for you, down to the last cell.
Live 3D view needs WebGL 2 — the spec sheet below has every number
Pack90kWh16 modules · 800 V
Drive400kW160 front · 240 rear
Exploded view000%Scroll to unbolt
The platform
One flat deck. Your vehicle on top.
Four wheelbases, one set of extrusions
2,640 to 3,240 mm from the same side rails. Cell modules add in pairs, so range scales with length instead of with a new tooling bill.
By-wire everything
Steering, brakes and shifting are electrical. No column, no pedal box, no tunnel — put the driver wherever your design wants one.
P/01 data
The numbers your body engineers will ask for.
Figures for the 2,940 mm wheelbase, dual-motor build. The data pack adds hard points, load cases and the full CAD envelope.
| Pack | 16 modules · 90 kWh usable · 800 V |
|---|---|
| Drive units | 160 kW front · 240 kW rear · 9.1 : 1 |
| Deck height | 148 mm above axle line, flat ±1.5 mm |
| Top-hat mounts | 14 × M12, located to ±0.2 mm |
| Top-hat mass | up to 1,150 kg including payload |
| Suspension | double wishbone, all four corners |
| DC charge | 10–80 % in 18 min at 270 kW peak |
Programme
From first CAD to a rolling chassis.
- Day 1
Data pack
Hard points, mount loads, thermal and HV interfaces, crash envelopes. Your team starts the body the same afternoon.
- Week 10
Driving mule
A running P/01 with a test frame on top arrives at your door, with a calibration engineer who stays for a month.
- Month 14
Line-ready
Homologated platforms ship sequenced to your line, or we marry them to your bodies in Graz.
Get the hard points.
The P/01 data pack is 2.1 GB of CAD, load cases and interface specs under a one-page NDA. Tell us what you are building and we will send it.
Request the data pack